Без вентилятора, рабочая ширина 1048 мм, комплектуется химически стойкой эпоксидной рабочей поверхностью (# 4882803) и стальной тумбой с дверцами (# 9900000), габариты (Ш×Г×В): 1220×762×2154-2185.
Коротко о модели:
Без вентилятора, рабочая ширина 1048 мм, комплектуется химически стойкой эпоксидной рабочей поверхностью (# 4882803) и стальной тумбой с дверцами (# 9900000), габариты (Ш×Г×В): 1220×762×2154-2185.
Особенности:
Product Subcategory: General Chemistry
Nominal Width: 4'
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CE, NFPA 45, SEFA 1, UL
Lighting: incandescent
Style: Benchtop
Описание:
Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles. Choose from 4 and 6-foot widths.
Both standard and built-in blower models are available.
By-pass airflow design
Durable glacier white epoxy-coated 16 gauge steel exterior and interior resists chemical exposure.
Vapor-proof incandescent lights
Vertical-rising tempered safety glass sash
Adjustable two-piece baffle
Curved air foil
Blower and light switches (non-explosion-proof models)
Right side fixture panel factory-prepared to accept up to three service fixtures, one electrical duplex and one airflow monitor (kits sold separately)
Right interior wall factory-prepared for one cupsink and turret (cupsink and turret kit sold separately)
Epoxy-coated steel 10.31” OD exhaust connection
ETL listed (115 volt models)
CE conformity (230 volt models)
4' and 6' widths
Versatile built-in blower that mounts on top of the hood liner, above the hood or at a remote location
Explosion-proof light and blower
International electrical configurations
Unassembled hoods
Необходимый комплект:
Remote Blowers (except Built-In Blower Models)
Ductwork
Base cabinets
Adjustable Height Base stands
Solid Epoxy Flat Work Surfaces
Дополнительное оборудование:
Service fixture kits
Electrical receptacle kits
Cupsink and turret kit
Airflow monitors
Sash stops
Fire extinguishers
Характеристики:
Weight: 127.0 kg
Dimensions: 119.4 cm x 63.5 cm x 121.9 cm
Electrical: 208-230 volts, 50/60 Hz, 1 amp